home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
An Invitation to the Roland World of Music
/
Roland - An Invitation To The Roland World Of Music.bin
/
drivers
/
scp55
/
win31
/
readme.txt
< prev
next >
Wrap
Text File
|
1995-12-13
|
11KB
|
247 lines
****************************************************************************
SOUND Canvas PC Card SCP-55 Read me File
Version 1.10(E)
Copyright(C) 1995 Roland Corporation
All rights reserved.
****************************************************************************
Thank you very much for purchasing the SOUND Canvas PC Card SCP-55.
If you use the SCP-55 on Windows3.1, please refer to this Read me file.
This Read me file includes the latest information about the SCP-55 and
explanations about the SCP-55 Controller which are not written in the manual.
CONTENTS
0. HOW TO SEE THE SIGNS
1. INSTRUCTIONS FOR USING THE SCP-55
2. ABOUT THE SCP-55 CONTROLLER
2.1 Installation, and the Registration of Applications
2.2 Notes
* The SCP-55 Controller is applicable only to the SCP-55
driver for Windows3.1 .
* Windows is a registered trademark of Microsoft Corporation.
* Other trade marks and registered trademarks appeared in the
following sentences belong to their respective owners.
****************************************************************************
0. HOW TO SEE THE SIGNS
****************************************************************************
+--------------------------------------------------------------------------+
| |
| " " : This represents the name of a directory or a file. |
| |
| << >> : This represents the name of a window or a dialog box. |
| The procedure that follows << >> should be completed |
| within the same window or the dialog box. |
| |
| << >> -> << >> : This shows a window or a dialog box hierarchy. |
| For instance, << Main >> -> << Control Panel >> means |
| that you should open << Control Panel >> in << Main >>. |
| |
| { } : This represents the name of a menu or a command. |
| Click on the menu or command shown in { }. |
| |
| { } -> { } : This means you should execute the command in a menu or |
| open menus continuously. |
| For instance, { File } -> { New } means that you should |
| select the { New } command in the { File } menu. |
| |
| [ ] : This shows the name of a button. |
| Click on the button indicated in [ ]. |
| |
| { } -> [ ] : This means that you should select a menu and press a |
| button. |
| For example, { Program Group } -> [ OK ] means that you |
| should click on { Program Group } and then click [ OK ].|
| |
| < > : This represents the name of an icon. |
| Double-click on the icon shown in < >. |
| |
+--------------------------------------------------------------------------+
****************************************************************************
1. INSTRUCTIONS FOR USING THE SCP-55
****************************************************************************
SCP-55 Driver Version 1.01
----------------------------------------------------------------------------
< All Models >
- Before installing the enabler and driver of the SCP-55, please make
sure whether the Card Service and Socket Service are pre-installed in
your computer. Most computers have been pre-installed, but there are
some exceptions which need installations.
If the Card Service and Socket Service are NOT pre-installed in your
computer, please install them first referring your computer's manual,
then install the enabler and driver of the SCP-55.
- If your computer has a check box of {Use 32-Bit Disk Access} after
the process of <<Controll Panel>> -> <386 Enhanced> -> [Virtual
Memory] -> [Change], please do NOT check the box.
- When you use the WAVE function with the slow processing computer,
please use it in a low sampling frequency.
- When the SCP-55 is connected with the connecter box MCB-3, which is
sold separately, do NOT insert the card in the state of the MIDI IN-
input.
< IBM ThinkPad Series >
- If your computer is IBM ThinkPad 330C, 330Cs, 340, or 555BJ, please
start Windows AFTER inserting SCP-55. Do NOT insert or pull out the
SCP-55 during the play back.
< Compaq Contura Aero Series or 400CX Series >
- If the WAVE function does not work well with the Compaq Contura Aero
Series or 400CX Series, please take the following #1 or #2 step to
solve this problem.
1. Find and click;
<<Contorol Panel>> -> <Power> -> <<Power>>.
There, you will find the {Power Management}, please establish it
with {OFF}.
2. First, activate <Notepad> which is included in Windows, and open
"system.ini" in the directory of "Windows."
Then, search "device=vpowerd.386" under the blacket of
[386 Enh]. If you find this line (if you cannot find it, you do
not have to take these steps), insert ";" at the head of the line.
device=vpowerd.386ü@->ü@;device=vpowerd.386
Lastly, save this file and re-start Windows.
* Once you take a step above, you cannot use the advanced power
management function, but you will find no problem with Windows.
There is an exception with computers like Compaq which has
original energy-saving function. If you use this kind of computer,
you can use the energy saving function which is one of the
advanced power management function.
< If your WAVE file is played back uncorrectly. >
- If you play back an WAVE file by < Media Player > or < Sound
Recorder > which are included in Windows, there are cases that you
hear the WAVE file played back very slowly, or hear some noise. You
may avoid these troubles by taking steps below.
1. Double-click the < Drivers > icon in the << Control Panel >>.
Then the << Drivers >> dialogue window opens, and you will see the
list of Installed Drivers.
2. Choose { Roland SCP-55 Driver } and click << Setup >> button. Then
<< SCP-55 Information >> dialogue window opens, and you will see
the information about the SCP-55.
3. Change the value of { Waveout Factor } as follows.
( The factory preset value is { 20 }. )
ü@ü@ü@ü@ü@* When a WAVE file plays back very slowly;
Setup the value of { Waveout Factor } over { 30 }.
* When you hear noise;
Setup the value of { Waveout Factor } between { 0 } and { 10 }.
****************************************************************************
2. ABOUT THE SCP-55 CONTROLLER
****************************************************************************
The SCP-55 controller is an application which adjusts volumes of the
SCP-55.
<Mixing Level>
You can adjust the volumes of GS sound source, WAVE, Line input,
and MIC input by dragging each slider up and down.
<AD/DA Gain>
You can adjust the input to WAVE by dragging the A/D slider up and
down, and adjust the output by the D/A slider.
<GS Controll>
You can do a subtle adjustment of GS sound source.
You can adjust the Vol (Volume), Panpot, Rev (Reverb), and Chrs
(Chorus) by dragging each slider up and down.
2.1 Installation, and the Registration of Applications
----------------------------------------------------------------------------
Installing the SCP-55 Controller.
Following the enclosed "start up manual," please install the
enabler, and the "scp55cnt.exe" will be copied into the "scp" on
the hard disk, and the "scpmixer.dll" into "windows\system."
Starting Windows.
Making the SCP-55 Controller registering groups.
<<Program Manager>>
{File} -> {New}
<<New Program Object>>
{Program Group} -> [OK]
<<Program Group Properties>>
Type {SCP-55} in the blacket of {Discription}.
Then, click [OK].
Now you have created a group named <<SCP-55>> in <<Program Manager>>.
Then, register the SCP-55 Controller into the group of <<SCP-55>>.
<<Program Manager>> -> <<SCP-55>>
{File} -> {New}
<<New Program Object>>
{Program Item} -> [OK]
<<Program Item Properties>>
Click [Browse...].
<<Browse>>
{c:\} -> [OK] (or double-click {c:\}.)
* If your computer's hard disk drive is A drive, specify
{a:\}.
{scp} -> [OK] (or double-click {scp}. )
(In the left blacket,) {scp55cnt.exe} -> [OK]
<<Program Item Properties >>
{C:\SCP\SCP55CNT.EXE} is shown in the {Command Line}.
* If your hard disk drive is A drive, {A:\SCP\SCP55CNT.EXE} is
shown.
Input {SCP-55 Controller} in the blacket of {Description}.
Then, click [OK].
Now the icon of <SCP-55 Controller> is registered into the group of
<<SCP-55>>. By double-clicking this icon, you can start up the SCP-55
Controller.
2.2 Notes
----------------------------------------------------------------------------
- If you adjust values by sliders, the values will be reflected in
recording.
- If you insert or pull out the card after starting up the SCP-55
Controller, the values on the screen will be different from the
actual values. Next time you move the sliders, the values will be at
one.